Conference netcad::hub_mgnt

1757.0. "Unwanted request cannot be filtered?" by TENNIS::KAM (Kam USDS (714)261-4133 (DTN 535) IVO) Sun Dec 04 1994 13:31

    For some reason we're getting the following mom request.  We checked
    ALL the system on our side of the bridge and nothing is requesting a
    boot.  We only have ONE DECserver 200 and this in NOT the address.  
    
    We thought that by setting the bridge protocol values we shouldn't be
    seeing anything on our side?
    
    	Regards,
    
    	 kam
    $
%%%%%%%%%%%  OPCOM   4-DEC-1994 10:18:04.52  %%%%%%%%%%%
Message from user DECNET on TENNIS
DECnet event 0.7, aborted service request
From node 16.935 (TENNIS),  4-DEC-1994 10:18:04.46
Circuit QNA-0, Line open error, File open error, Load file
%MOM-E-OPENIN, error opening SYS$COMMON:[MOM$SYSTEM]MNENG1.SYS; as input
-RMS-E-FNF, file not found
Ethernet address = 08-00-2B-A6-03-4B

    
DECbridge> SHOW PROT
Protocol 1: filter all ethernet protocol 60-01
Protocol 2: filter all ethernet protocol 60-02
Protocol 3: filter all ethernet protocol 60-07
Protocol 4: filter all ethernet protocol 80-38
Protocol 5: unused protocol
Protocol 6: unused protocol
Protocol 7: unused protocol
Protocol 8: unused protocol
Protocol 9: unused protocol
Protocol 10: unused protocol
Protocol 11: unused protocol
Protocol 12: unused protocol
Protocol 13: unused protocol
Protocol 14: unused protocol
Protocol 15: unused protocol
Protocol 16: unused protocol                  

    Kindly note that MNENG1.SYS if the loadable file for Decserver90C.
    Is there any Decserver of this type is connected to your network
    by any means or wrongly configured on any of your system.
    
    Also if you have this file on your system , copy it into
    SYS$COMMON:[DECSERVER] and then observer wheather any one is 
    getting loaded or not . If loaded it will give you a load successful
    message with the ethernet address.
    
    Try now.
    
    Basu 
    

    
    That name is the default image name used by the DECserver 90TL and 90M.
    

    OOPS!  We had the DECserver 90TL laying around the tables all these
    months.  In the cleanup and organization we decided to stick it in the
    DEChub 90, forgetting that it needs to be downloaded.  Getting so used
    to the option self loading.
    
    Sorry about the oversight.
    
    	Regards,
    	
     	 kam
    

    .2 is absolutely correct . pl correct the model name in my last 
    info.1