[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1690.0. "may be not ok??TNPUBS::PUBLIC$651:[PUBLIC.ONEHUB]HUBWATCH_V31_INSTALL.PS;1" by ISIDRO::ELSA () Tue Nov 15 1994 05:25

    
    	Hi,
    
    	Today I copied the file
    	TNPUBS::PUBLIC$651:[PUBLIC.ONEHUB]HUBWATCH_V31_INSTALL.PS;1
    	and printed but there are a problem only printed until
    	the page 1-13, after gives the following error:
    	%dcps-w-undef, undefined:Name not known-offending command....
    	%dcps-e-flushing, rest of job will be ignored,
    
    	I copied this file twice and print on different printers.
    
    	It's possible this file are bad???
    
    	The problem is that lost many information very important,
    	VMS installation and osf/1 installation.
    
    		Thanks in advance,
    		Elsa Soengas P.
    		MCS Spain
T.RTitleUserPersonal
Name		DateLines
1690.1Copied&printed file w/o errorsDELNI::ROUNDSTue Nov 15 1994 07:124
    I copied the file from the TNPUBS directory and was able to print it
    on an lps40 with no errors.
     
    Nat
1690.2declaser 2100 plus was badISIDRO::ELSATue Nov 15 1994 07:409
    
    	Hi,
    
    	Thanks, printed on lps20 was ok.
    	printed on two declaser 2100 was bad.
    
    			Elsa Soengas
    			MCS Spain
1690.3missing Fonts?NAC::FORRESTFri Dec 02 1994 20:084
    I think the problem may be related to Fonts. The manuals were written
    in Microsoft Word, and use Fonts, which may not be standard with all of
    our printers. The manual uses several Fonts, so I don't know which 
    one is most likely the problem.