[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1678.0. "DECbridge 900MX selectively forwards IP traffice" by WRAFLC::WOODALL (MACRO is the best.) Thu Nov 10 1994 13:18

    My customer has had 2 seperate DECbridge 900MX bridges (out of a total
    of 10) start behaving strangely.  The DECNET and LAT traffice was
    unaffected.  The TCP/IP traffic was interrupted BUT ONLY FOR CERTAIN IP
    ADDRESSES.
    
    	The bridges were configured for class B network mask of 255.255.0.0
    
    The addresses in question were 137.244.193.???, 137.244.39.???, and
    137.244.224.???   The addresses in these ranges were not passed by the
    bridges.  You could however still access other IP address such as
    137.244.128.???
    
    A reboot of the bridge would correctly the problem.  After 2-3 weeks
    the problem reappeared.  Once the bridge enters this state, you cannot
    ping it and cannot access it with HUBwatch.
    
    This problem is currently affect approximately 3500 users.
    
    Are there any known problems with the DECbridge 900MX and IP traffic??
    
    Frank
T.RTitleUserPersonal
Name		DateLines
1678.1Yes known bugs in 900MX with firmware older than 1.4.0NETCAD::BATTERSBYThu Nov 10 1994 13:333
    What rev of firmware is currently in these bridges?
    
    Bob
1678.2V1.4.0 firmwareWRAFLC::WOODALLMACRO is the best.Thu Nov 10 1994 14:389
    Sorry Bob.
    
    I thought for sure I had already included that info but overlooked it.
    
    
    	V1.4.0 of the firmware
    
    
    Frank