[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1647.0. "Hubwatch launc from Netview question." by COPCLU::EBC () Wed Nov 02 1994 10:03

I have installed the latest Hubwatch kit on my OSF Netview system.
Hubwatch works fine when started standalone.

I can get it launched from Netview too by selecting the hub-icon and choosing
Hubwatch from the Monitor menu, but only if I modify
 /usr/lib/X11/app-defaults/Hubwatch
to specify the address of the hub.

I would have expected Netview to pass the address to Hubwatch, so that Hubwatch
would be launched against the hub selected through the map interface.
The documentation is quite sparse at the moment; have I missed something ?

Erik
T.RTitleUserPersonal
Name		DateLines
1647.1Ready soonNETCAD::FORINOFri Nov 04 1994 10:3415
    Erik,
    
    	Up to now (BL56 and earlier) all the HUBwatch for OSF kits
    contained the ability to register HUBwatch with Netview for
    launching but these files were not completely correct.  The mail
    that went out with the kit pointers specifically said that the
    Netview launch was not working.
    
        However, when BL57 goes out (probably today) the real support
    for Netview will be available.
    
    	I will add another reply to this note later explaining how
    the launch from Netview works after BL57 goes out.  
    
    							John