[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1643.0. "Configuration retained after power re-cycle?" by HGRNCC::FARADAYCHONG (Faraday Chong@hgo 852-8053590) Tue Nov 01 1994 08:26

    This is question regarding retention of configuration setup across
    power failure. Previous notes seemed to confirm this.
    
    For a particular configuration, eg, DEChub 900MS, DECswitch with FDDI
    come out to front panel and a number Ethernet in the backplane, a few
    DECrepeater 900TM connected to DECswitch 900EF via backplane flexible
    channels.
    
    Will this configuration be preserved if we remove AC power from the hub
    and then re-apply power again? Note: there is no removal of any
    modules.
    
    To generalize the scenario, will configuration be retained for other
    modules after AC power re-cycle?
    
    Faraday

T.R	Title	User	Personal Name	Date	Lines
1643.1	LAN config is retained	ROGER::GAUDET	Because the Earth is 2/3 water	`Tue Nov 01 1994 10:11`	3
	Yes, backplane LAN connections are saved across hub power cycles. ...Roger...