[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1641.0. "DH900 Multiswitch Firmware upgrade and loss of IP address" by GIDDAY::STANISLAUS () Tue Nov 01 1994 00:28


	I upgraded a DH900 Multiswitch using DECnduplus on a PC. The upgrade was
from FW 2.2.1 to 3.1. 

	After the upgrade I found the IP address of the DH900 Multiswitch is
lost.

	So Hubwatch was unable to talk to that HUB till I set the Inband IP
address again. I expect the upgrade to retain the IP address.

	I had no LAN interconnection when I did the upgrade. If I had LAN 
interconnections would all that be lost too after the upgrade. If the answer is
YES that would be a big problem.

Alphonse

T.R Title User Personal
Name Date Lines

1641.1 Straight from the V3.1 release notes ROGER::GAUDET Because the Earth is 2/3 water Tue Nov 01 1994 09:01 6

T.R	Title	User	Personal Name	Date	Lines
1641.1	Straight from the V3.1 release notes	ROGER::GAUDET	Because the Earth is 2/3 water	`Tue Nov 01 1994 09:01`	6
	"When you update your Hub Manager to version V3.1 from version V3.0, all nonvolatile data stored in the Hub Manager is retained. When you update your DEChub 900 to version V3.1 from a version prior to V3.0, all nonvolatile data stored in the Hub Manager is cleared." ...Roger...

"When you update your Hub Manager to version V3.1 from version V3.0, all
nonvolatile data stored in the Hub Manager is retained. When you update your
DEChub 900 to version V3.1 from a version prior to V3.0, all nonvolatile data
stored in the Hub Manager is cleared."

...Roger...