[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
|
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
1626.0. "NDUplus problem??" by WBCVS1::GOODEN (Gene Gooden) Thu Oct 27 1994 15:24
I have a NDUplus problem (I think).
When I try to upgrade the firmware in anything I get the behavior
described below. In the provided example I was attempting to reload the
firmware in a DECagent90.
The file actually gets loaded down but NDU never progress past the point
in the script where the TFTP server is started. (Never gets to the poll.)
When trying to upgrade the firmware in our GIGAswitch the same behavior
occurs. At the GIGAswitch console when I get the MIB variable transferSize
I can see the load taking place. The load will complete but the transfer
to the specified module never takes place because the NDU script is
still sitting at the TFTP server.
In the DECNDU_TFTP_STATUS.LOG file I get the following line:
"Completion status is cannot bind address."
What does the log message mean? Why?
Load host configuration Configuration:
VAXstation 4000 m60
40MB memory
OpenVMS 6.1
UCX 3.1
NDUPLUS010.A;13 576 1-JUL-1994 12:40:36.00 (lastest version)
EXAMPLE OF PROBLEM
--------------------------------------------------------------------------------
$ DOWNLOAD LOAD /FORCE=DECAGENT 16.67.0.203 /pass="public" DENMA021.SYS
--------------------------------------------------------------------------------
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
HOSTNAME: wbcvs2.wbc.dco.dec.com
Server: 16.67.0.149
DECNDU: (TFTP) Target address = 16.67.0.203
[DECAGENT] Getting sysDescr
DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.00 SW=V2.1.3
[DECAGENT] Setting server IP address (da90LoadIpHostAddr).
[DECAGENT] Getting Server IP Address
16.67.0.149
[DECAGENT] Setting filename (da90LoadFilename).
[DECAGENT] Get filename.
DENMA021.SYS
[DECAGENT] Setting AdminStatus/trigger (da90LoadAdminStatus).
[DECAGENT] TFTP serve.
------ just sits here ------
--------------------------------------------------------------------------------
OPCOM message to console
--------------------------------------------------------------------------------
%%%%%%%%%%% OPCOM 27-OCT-1994 13:05:53.97 %%%%%%%%%%%
Message from user INTERnet on WBCVS2
INTERnet ACP TFTP Accept Request from Host: 16.67.0.203 Port: 69
--------------------------------------------------------------------------------
SYS$SYSDEVICE:[UCX$TFTP]UCX$TFTP_STARTUP.LOG
--------------------------------------------------------------------------------
$!
$! login.com for DEC TCP/IP Services Auxiliary service
$ !
$ SET PROCESS /PRIV=(NOALL,NETMBX,TMPMBX)
$ RUN SYS$SYSTEM:UCX$TFTP.EXE
Oct 27 11:35:12 17664 Recv RRQ File=DENMA021.SYS Mode=octet
2052 Init Task 8d290 First 8d290 Next 0 Sock 224 File 3
2052 Send DATA 1 Size 512
2052 Recv ACK 1
2052 Send DATA 2 Size 512
2052 Recv ACK 2
.
.
2052 Send DATA 480 Size 512
2052 Recv ACK 480
2052 Send DATA 481 Size 512
2052 Recv ACK 481
2052 Clos File 3
2052 Send DATA 482 Size 0
2052 Recv ACK 482
2052 Clos Sock 224
2052 Free Task 8d290 First 8d290 Next 0
--------------------------------------------------------------------------------
$ type SYS$SYSDEVICE:[UCX$TFTP_ROOT]DECNDU_TFTP_STATUS.LOG
--------------------------------------------------------------------------------
Completion status is cannot bind address.
--------------------------------------------------------------------------------
UCX> sho service tftp/fu
Service: TFTP
State: Enabled
Port: 69 Protocol: UDP Address: 0.0.0.0
Inactivity: 5 User_name: UCX$TFTP Process: UCX$TFTP
Limit: 1 Active: 1 Peak: 1
File: SYS$SYSDEVICE:[UCX$TFTP]UCX$TFTP_STARTUP.COM
Flags: Listen
Socket Opts: Rcheck Scheck
Receive: 0 Send: 0
Log Opts: Acpt Actv Dactv Conn Error Exit Logi Logo Mdfy Rjct TimO Addr
File: SYS$SYSDEVICE:[UCX$TFTP]UCX$TFTPD_STARTUP.LOG
Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0
--------------------------------------------------------------------------------
UCX> sho service bootp /fu
Service: BOOTP
State: Enabled
Port: 67 Protocol: UDP Address: 0.0.0.0
Inactivity: 5 User_name: UCX$BOOTP Process: UCX$BOOTP
Limit: 1 Active: 1 Peak: 1
File: SYS$SYSDEVICE:[UCX$BOOTP]UCX$BOOTP_STARTUP.COM
Flags: Listen
Socket Opts: Rcheck Scheck
Receive: 0 Send: 0
Log Opts: Acpt Actv Dactv Conn Error Exit Logi Logo Mdfy Rjct TimO Addr
File: SYS$SYSDEVICE:[UCX$BOOTP]UCX$BOOTP_STARTUP.LOG
Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0
--------------------------------------------------------------------------------
UCX> sho dev
Port Remote
Device_socket Type Local Remote Service Host
bg145 DGRAM 67 0 BOOTP 0.0.0.0
bg146 STREAM 512 0 REXEC 0.0.0.0
bg147 STREAM 23 0 TELNET 0.0.0.0
bg148 DGRAM 69 0 TFTP 0.0.0.0
bg149 DGRAM 520 0 0.0.0.0
bg154 DGRAM 1035 0 0.0.0.0
UCX> exit
$ sho dev/fu bg154
Device BG154: is online, mounted, record-oriented device, network device,
mailbox device.
Error count 0 Operations completed 13
Owner process "SYSTEM" Owner UIC [SYSTEM]
Owner process ID 0000009B Dev Prot S:RWPL,O:RWPL,G:RWPL,W:RWPL
Reference count 1 Default buffer size 256
$ sho dev/fu bg148
Device BG148: is online, mounted, record-oriented device, network device,
mailbox device.
Error count 0 Operations completed 9
Owner process "UCX$TFTP_BG148" Owner UIC [SYSTEM]
Owner process ID 000000D5 Dev Prot S:RWPL,O:RWPL,G:RWPL,W:RWPL
Reference count 1 Default buffer size 256
$ sho dev/fu bg145
Device BG145: is online, mounted, record-oriented device, network device,
mailbox device.
Error count 0 Operations completed 14
Owner process "UCX$BOOTP_BG145" Owner UIC [SYSTEM]
Owner process ID 000000D2 Dev Prot S:RWPL,O:RWPL,G:RWPL,W:RWPL
Reference count 1 Default buffer size 256
--------------------------------------------------------------------------------
UCX> sho dev bg145 /fu
Device_socket: bg145 Type: DGRAM LOCAL REMOTE
Port: 67 0
Host: 0.0.0.0 0.0.0.0
Service: BOOTP
RECEIVE SEND
Queued I/O 0 0
Q0LEN 0 Socket buffer bytes 0 0
QLEN 0 Socket buffer quota 9000 9000
QLIMIT 0 Total buffer alloc 0 0
TIMEO 0 Total buffer limit 36000 36000
ERROR 0 Buffer or I/O waits 2 0
OOBMARK 0 Buffer or I/O drops 0 0
I/O completed 2 2
Bytes transferred 600 600
Options: REUSEADR
State: PRIV
RCV Buff: WAIT
SND Buff: None
UCX> sho dev bg148 /fu
Device_socket: bg148 Type: DGRAM LOCAL REMOTE
Port: 69 0
Host: 0.0.0.0 0.0.0.0
Service: TFTP
RECEIVE SEND
Queued I/O 0 0
Q0LEN 0 Socket buffer bytes 0 0
QLEN 0 Socket buffer quota 9000 9000
QLIMIT 0 Total buffer alloc 0 0
TIMEO 0 Total buffer limit 36000 36000
ERROR 0 Buffer or I/O waits 1 0
OOBMARK 0 Buffer or I/O drops 0 0
I/O completed 1 0
Bytes transferred 24 0
Options: REUSEADR
State: PRIV
RCV Buff: WAIT
SND Buff: None
UCX> sho dev bg154 /fu
Device_socket: bg154 Type: DGRAM LOCAL REMOTE
Port: 1035 0
Host: 0.0.0.0 0.0.0.0
Service:
RECEIVE SEND
Queued I/O 0 0
Q0LEN 0 Socket buffer bytes 0 0
QLEN 0 Socket buffer quota 9000 9000
QLIMIT 0 Total buffer alloc 0 0
TIMEO 0 Total buffer limit 36000 36000
ERROR 0 Buffer or I/O waits 0 0
OOBMARK 0 Buffer or I/O drops 0 0
I/O completed 6 6
Bytes transferred 389 295
Options: None
State: PRIV
RCV Buff: None
SND Buff: None
UCX>
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1626.1 | DECndu has its own TFTP server | ROGER::GAUDET | Because the Earth is 2/3 water | Thu Oct 27 1994 15:44 | 8 |
| You must disable UCX's TFTP server. DECndu comes with its own built-in TFTP
server. It cannot interact with an external TFTP server.
$ UCX SET NOSERVICE TFTP
A future version of DECndu will permit the use of an external TFTP server.
...Roger...
|
| 1626.2 | thanks | WBCVS1::GOODEN | Gene Gooden | Thu Oct 27 1994 16:58 | 0 |
| 1626.3 | Roger u were right...thanks but... | PTOJJD::DANZAK | Pittsburgher � | Wed Jan 04 1995 21:43 | 9 |
| $*#(@&(*&#*(@ after working for 2 hours NOT getting NDU on the PC to
work....I tried the old method/VAX/VMS etc. And, made sure that UCX
TFTP and BOOTP were enabled...and...to my chagrin....
AAAAAARRUG from 4:30pm to 9:30pm....
Thanks, roger...sigh!!!!!!!!!!!!
|
| 1626.4 | How come it works OK for me? | GIDDAY::DANIEL | | Tue Apr 04 1995 00:46 | 119 |
| I run DECNDUPLUS V1.0e, UCX V3.2 & OpenVMS V6.1
I get the same process hang after [DECAGENT] TFTP serve, but when
I do a control C, & check the version it is updated version.
DECNDU_TFTP_STATUS.LOG;1 has the msg
"Completion status is cannot bind address."
--------------------------------------------------------------------------------
MANDLASYS>ucx sho service tftp
Service Port Proto Process Address State
TFTP 69 UDP UCX$TFTP 0.0.0.0 Enabled
MANDLASYS>ucx sho service tftp/fu
Service: TFTP
State: Enabled
Port: 69 Protocol: UDP Address: 0.0.0.0
Inactivity: 5 User_name: UCX$TFTP Process: UCX$TFTP
Limit: 1 Active: 1 Peak: 1
File: SYS$SYSDEVICE:[UCX$TFTP]UCX$TFTP_STARTUP.COM
Flags: Listen
Socket Opts: Rcheck Scheck
Receive: 0 Send: 0
Log Opts: Acpt Actv Dactv Conn Error Exit Logi Logo Mdfy Rjct TimO Addr
File: SYS$SYSDEVICE:[UCX$TFTP]UCX$TFTPD_STARTUP.LOG
Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0
MANDLASYS>ucx sho service bootp/fu
Service: BOOTP
State: Enabled
Port: 67 Protocol: UDP Address: 0.0.0.0
Inactivity: 5 User_name: UCX$BOOTP Process: UCX$BOOTP
Limit: 1 Active: 1 Peak: 1
File: SYS$SYSDEVICE:[UCX$BOOTP]UCX$BOOTP_STARTUP.COM
Flags: Listen
Socket Opts: Rcheck Scheck
Receive: 0 Send: 0
Log Opts: Acpt Actv Dactv Conn Error Exit Logi Logo Mdfy Rjct TimO Addr
File: SYS$SYSDEVICE:[UCX$BOOTP]UCX$BOOTP_STARTUP.LOG
Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0
MANDLASYS>
-------------------------------------------------------------------------------
MANDLASYS>down load/force=decagent 16.153.32.215 mom$load:denma021.sys
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
DECNDU: (TFTP) Target address = 16.153.32.215
[DECAGENT] Getting sysDescr
DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.01 SW=V2.0.16 <-------------
(
[DECAGENT] Setting server IP address (da90LoadIpHostAddr).
[DECAGENT] Getting Server IP Address
16.153.32.64
[DECAGENT] Setting filename (da90LoadFilename).
[DECAGENT] Get filename.
MOM$LOAD:DENMA021.SYS
[DECAGENT] Setting AdminStatus/trigger (da90LoadAdminStatus).
[DECAGENT] TFTP serve.
Interrupt
MANDLASYS>
Interrupt
MANDLASYS>down sho dev 16.153.32.215
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
[SYSDESCR] Getting Device INFO (sysDescr)
DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.01 SW=V2.1.3 <---------------
MANDLASYS>down load/force=decagent 16.153.32.215 mom$load:denma020.sys
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
DECNDU: (TFTP) Target address = 16.153.32.215
[DECAGENT] Getting sysDescr
DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.01 SW=V2.1.3
(
[DECAGENT] Setting server IP address (da90LoadIpHostAddr).
[DECAGENT] Getting Server IP Address
16.153.32.64
[DECAGENT] Setting filename (da90LoadFilename).
[DECAGENT] Get filename.
MOM$LOAD:DENMA020.SYS
[DECAGENT]Setting AdminStatus/trigger (da90LoadAdminStatus).
[DECAGENT] TFTP serve.
Interrupt
MANDLASYS>down sho dev 16.153.32.215
(c) Digital Equipment Corporation. 1993. All Rights Reserved.
[SYSDESCR] Getting Device INFO (sysDescr)
DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.01 SW=V2.0.16 <--------------
MANDLASYS>ucx sho ver
DEC TCP/IP Services for OpenVMS VAX Version V3.2
on a VAXstation 3100/GPX running OpenVMS V6.1
-------------------------------------------------------------------------------
|