[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1609.0. "900tm repeater resets internal ports on power fail" by CSC32::L_MORSE () Mon Oct 24 1994 17:32

	A cutomer noticed that their DR900tm units will lose lan connections
	after a power fail.  Port 1 goes to the thinwire and  port 2 is a
	stub not connected.

	I created a lan connected port 2 to the new lan then power failed the
	900tm.  It went to the original connections, port 1 on the thinwire
	and 2 is a stub unconnected.

	Is this normal and expected.  The customer was suprised.  I have
	3.1 on the hub and v.1.1 in the repeater.  


	Larry Morse

T.R	Title	User	Personal Name	Date	Lines
1609.1		NETCAD::SLAWRENCE		`Fri Oct 28 1994 09:21`	6
	No - that is not normal. Take a look at the error log in the Hub Manager; I suspect that you will see several entries; copy them as carefully as possible.