[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1604.0. "Dual power sources" by JAYJAY::KORNS () Fri Oct 21 1994 16:01

I've seen/heard we are working on a device to allow two power
sources to the DH900. I seem to remember it was being worked
with a 3rd party as either a reference sell or a buy-out.

I got this as a real requirement from Dow Chemical this week
and said I'd check into it. What's the status? Who would be the
right person to talk to?

Dave
T.RTitleUserPersonal
Name		DateLines
1604.1...and the answer is:JAYJAY::KORNSFri Oct 21 1994 18:1612
From:	DELNI::BUZZELL      21-OCT-1994 15:38:55.91
To:	JAYJAY::KORNS
CC:	
Subj:	RE: Dual Power

Dave,

     Dual power will be the H7661-AA. It should announce and ship next month.
I will have one next week at NETACAD. Price hasn't been set yet but probably
either $300 or $500.

ED
1604.2Available in Jan/FebDELNI::MACARTHURMon Oct 24 1994 11:2712
    Dave,
    
    The POWERswitch (Product name for the H7661-AA) is being built this
    week in order to be submitted to the agencies for Safety Testing. This
    process takes approximately 10 weeks to complete. Once we have approval
    to ship from all three agencies (TUV, UL, & CSA), then we'll begin the
    manufacturing ramp. I don't believe we'll have units available for
    shipment until sometime in January, possibly February. If you need more
    information, you can contact Deb Flint, Product Manager for the
    POWERswitch (DELNI::FLINT). Hope this helps.
    
    Bob