[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1603.0. "SLIP of DECPacketprobe90 question ?" by SOS6::PEYRACHE (Jean-Yves Peyrache Country Support Group France) Fri Oct 21 1994 14:49

 Hi,

 With V2.1 of Decpacketprobe90 , you can use SLIP and Serial connection
  to works With Probewatch.

 In this case which port is used for SLIP connection and Which port
 is Used to Monitor the Network

  thanks for any comments 

  Jean-Yves

T.R Title User Personal
Name Date Lines

1603.1 monitor on Ethernet only NAC::FORREST Fri Dec 02 1994 19:42 5

T.R	Title	User	Personal Name	Date	Lines
1603.1	monitor on Ethernet only	NAC::FORREST		`Fri Dec 02 1994 19:42`	5
	Jean-Yves, my understanding is that the DECpacketprobe will only monitor on the Ethernet port. However, either the Ethernet, or the serial port can be used to control the probe and retrieve the SNMP data. From the console, you can set up the serial port for SLIP.

    Jean-Yves, my understanding is that the DECpacketprobe will only 
    monitor on the Ethernet port. However, either the Ethernet, or the 
    serial port can be used to control the probe and retrieve the SNMP 
    data. From the console, you can set up the serial port for SLIP.