| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Where can I find a description of the method used to translate FDDI to
Ethernet on the DECbridge 900EF?
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1565.1 | NETCAD::SLAWRENCE | Mon Oct 17 1994 10:14 | 9 | ||
There is some discussion of this in our new WWW info on the switches
under:
http://www-dechub.lkg.dec.com/internal-info/switches/funct.html
| |||||
| 1565.2 | NETCAD::ANIL | Tue Oct 18 1994 17:28 | 13 | ||
Some other resources to look at:
- the AppleTalk link on the WWW switch page contains a description
of the translation algorithm
- IEEE 802.1h is the standard
- Digital Technical Journal, Sep '91 has an article
- Currently published version of Bridge and Extended LAN Reference
In general there are 4 cases that translation looks at: 802 packets;
Ethernetv2 packets; AppleTalk (also called NTP or non-translated
protocol); raw 802 IPX.
Anil
| |||||