[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1550.0. "What version of Ultrix for ProbeWatch" by ECACAD::Henry (Send mail to WKRP::HENRY) Tue Oct 11 1994 09:46

I am tring to het to TNPUBS this morning to copy down the latest version of 
the Probe watch manuals to find out the answer to two questions.  Since 
TNPUBS is down (At least from here in Cincinnati) I will ask my questions 
here....

1	What verison of ULTRIX will Probewatch run on.  i.e. 4.4?
	I have a 5000 mdl 240 

2	I assume that I need Motif is  the interface but it does not seem 
	that MOTIF came with 4.3 A if this is required will this be 	
	installed like another Layerd product???

Thanks for any assistance!!!!

Gary
T.RTitleUserPersonal
Name		DateLines
1550.1retired?WOTVAX::64021::Tim_BanksNetwork MercenaryTue Oct 11 1994 13:205
Don't know what your plans are with PW on Ultrix, but I have been told that 
it is to be retired, hence you may not find a kit.....
		
	
			Tim
1550.2internal use is fine, but Buyer BewareNAC::FORRESTFri Dec 02 1994 19:067
    From the SPD/SSA, it will run on V4.2A or V4.3; it was not tested 
    on V4.4 before release. It requires OSF/Motif V1.1.3, at least, which 
    you must obtain and install separately.
    
    As noted in .1, PROBEwatch for ULTRIX will be retired as soon as 
    PROBEwatch for OSF/1 is available.