[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1487.0. "3.1 Hubwatch doesn't recognise decbridge90MX" by GIDDAY::MORETTI (Not drowning...waving) Tue Sep 27 1994 22:01

    
    
    I have loaded V3.1 of Hubwatch for windows at a customers site which is
    running Novell and when we bring the DECHUB900 up we get a "?" for the
    DECbridge90MX.
    
    Does this mean we don't have the support built into the Hubwatch
    product yet or is there something wrong with my version of s/w ??
    
    John Moretti
    NIS/PCI consultant
T.RTitleUserPersonal
Name		DateLines
1487.1Support is ThereNETCAD::DRAGONWed Sep 28 1994 09:1016
    
    John,
    
    	What is the version of HUBwatch for Windows that you have (ie
        X3.1.?)? There is support for the DECbridge 900MX. Also, I'm
        sure that you checked this, but just in case... Be sure that 
        you select the correct HUBwatch icon via Program Manager. If
        you installed V3.1 and still have the older version installed,
        you may have accidentally run the older version. A stretch, but
        hopefully its something simple.
    
        Also, please check the versions of MAM and DECbridge 900MX firmware for
        inclusion here.
    
    Regards,
    Bob
1487.2Getting the info......GIDDAY::MORETTINot drowning...wavingThu Sep 29 1994 00:5813
    
    Bob,
    
    Thanks for the input, I'll recheck all that info and report that
    tomorrow.
    
    
    Thanks 
    
    john
    
    PS , I did delete the icon and older s/w before I started but you never
    know if you might have slipped up.
1487.3Re-install fixed itGIDDAY::MORETTINot drowning...wavingMon Oct 03 1994 02:309
    Thanks for the help, I found my screw-up....my eyes are getting blurry
    in my old age.
    
    After I re-installed the X3.1.1 software I got the decbridge900mx to be
    recognised and managed. It was on a Novell network which muddied the
    waters a bit and we had to hack the net_cnfg file to get it all to
    work.
    
    John