[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1482.0. "V3.1/Vms avail?" by PTOJJD::DANZAK (Pittsburgher �) Tue Sep 27 1994 12:05

    Is a seed for HUBWATCH V3.1/VMS available?
    
    Currently the customer has a DEChub900 for eval, using HUBWATCH V3.0 to
    manage on their mgmt VAXstations, they would like to install either a
    PE900 or DECswitch 900.  In order to manage the PE900 I need V3.1 for
    VMS (?right)?  
    
    (Now if I had a DECswitch900MX....I could do it now but...duuh...gawd.)
    
    THey have no PCs...as they are an all-MAC shop etc....
    
    So, is V3.1 avail for test/eval etc.?
    
    Thanks
    j

T.R	Title	User	Personal Name	Date	Lines
1482.1	V3.0 included latent PEswitch support	SLINK::HOOD	I'd rather be at the Penobscot	`Wed Sep 28 1994 11:23`	4
	V3.0 will support the PEswitch. Tom Hood
1482.2	V3.1 not available for external use	NETCAD::HAROKOPUS		`Wed Sep 28 1994 14:21`	6
	V3.1 is not quite ready for external use. There were a few last minute show-stoppers. Stay tuned though it should be out very soon. Regards, Bob
1482.3	Ok, thank, post it when ready!	PTOJJD::DANZAK	Pittsburgher �	`Wed Sep 28 1994 15:41`	5
	Ok thanks I'm happy about the 3.0 support!!! Thanks! j