[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1468.0. "upgrade from decndu agent90 problem???" by ISIDRO::ELSA () Fri Sep 23 1994 04:29

    
    
    	Hi,
    
    	I'm trying to upgrade one agent90 that stay on hub90 ,
    	the firmware version of agent90 is T2.0.10
    
    
    $ download load 83.80.0.1 mom$load:DENMA021.SYS;1/force=DECagent
    
    (c) Digital Equipment Corporation. 1993. All Rights Reserved.
    
    DECNDU: (TFTP) Target address = 83.80.0.1
    [DECAGENT] Getting sysDescr
       DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.00 SW=T2.0.10
    
                   
    
    	When I try to make the upgrade:
    
    	$ download load 83.80.0.1 mom$load:DENMA021.SYS;1/force=DECagent
    
    (c) Digital Equipment Corporation. 1993. All Rights Reserved.
    
    DECNDU: (TFTP) Target address = 83.80.0.1
    [DECAGENT] Getting sysDescr
       DEChub 90 8 slots, DECagent 90 HW=D01 ROM=BL05.00 SW=T2.0.10
    
    
    @
    [DECAGENT] Setting server IP address (da90LoadIpHostAddr).
    DECNDU: ERROR STATUS = No response from device.
                                            
    On the log file I see the following: number 3
    	
    	What is the problem??
    
    				Thanks in advance
    				Elsa Soengas

T.R	Title	User	Personal Name	Date	Lines
1468.1	Community may be	PADNOM::PEYRACHE	Jean-Yves Peyrache Country Support Group France	`Fri Sep 23 1994 06:14`	7
	Hi Elsa, Have you Public Community set on DECagent90 tried using MOP Jean-Yves
1468.2	Check community string first	ROGER::GAUDET	Because the Earth is 2/3 water	`Fri Sep 23 1994 08:54`	10
	Yes, as Jean-Yves said, is the community string of community #1 (the agent's community) set to "public"? If not, you must either set it to "public" or use the /PASSWORD=<agent's_read-write_community_string> qualifier to get the upgrade to go forward. Even more simple and that, can you ping the agent? $ UCX PING <agents's_IP_address> ..Roger...