[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1466.0. "SMF/PMD used as an M port" by SLOVAX::GOODFELLOW (Reb Breinholt) Thu Sep 22 1994 15:34

    I have a configuration with a DECconcentrator 900MX that is using port
    1 as a multi-mode PMD A port and port 6 as a multi-mode B port and with
    a requirement to use a single-mode PMD as an M port.  In previous notes
    it is unclear to me if this can be done.  The problem of leaving a
    blank space next to the single-mode PMD is not an issue. The question
    is if the single-mode PMD can act as an M port only.
    
    Thanks for your help.
    
    Regards, Brian

T.R	Title	User	Personal Name	Date	Lines
1466.1	Go for it	NETCAD::B_CRONIN		`Fri Sep 23 1994 11:45`	4
	I don't know of any reason why you cannot use the SMF PMD as an M port.