[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1439.0. "DECbridge90 Can't Filter OSI Mulitcasts" by MAASUP::PORAMBO () Fri Sep 16 1994 16:35

    
    
      I'm having no luck filtering the OSI Multicasts used by our
    DECnet/OSI End Systems and Intermediate Systems.
    
      As previously documented in #136, using the "inverted" method of
    "forwarding" only wanted protocols fails to keep out the OSI
    multicasts.
    
      Obviously this was never changed/modified/fixed in the product. How
    then can I set up a filter to block this traffic? 
    
      The bridge can set up SNAP filters but I can't find a way to filter
    out the SAP "FE" used by these multicasts.
    
    Any suggestions appreciated,
    
    
    Bob
T.RTitleUserPersonal
Name		DateLines