[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1403.0. "where are the seeds unit for Hubwatch/windows and hubwatch/OSF/1 ?" by TLSE10::SELLES (Pierre-Jean - Toulouse -France) Mon Sep 12 1994 07:35


	where can we get the seeds units for evalution for hubwatch/windows
and hubwatch/OSF1 ?

	and , " a candide question" , why is the OSF/1 delayed one month after
windows ? we are waiting since august for a customer , we told him that 
OSF/1 was better for supervising multi-hubs , and now we have to deliver
this solution for end of september , so we are a little bit annoyed by the delay.

now we all understand in the field that there are priorities in engineering 
and questions of funding too ;-)  

	
~~~ 9 Sept 1994 FCS- SCHEDULE FOR HUBwatch (NAC::NIPG:[MANAGE]STATUS.TXT) ~~~
**********  DIGITAL CONFIDENTIAL *********************************************

HUBwatch        VERSION                  COMMENTS
                3.1     4.0
Windows       Oct  94*  Q1 CY95  Runs under HP OV (Seeds now, SSB late Sept)
OpenVMS       Sept 94   ???????  Seeds available now
OSF/1         Nov  94   Q1 CY95  POLYCENTER launch with 3.1 (seeds late Sept)
T.RTitleUserPersonal
Name		DateLines
1403.1SLINK::HOODI'd rather be at the PenobscotMon Sep 12 1994 12:186
For what it's worth...

HUBwatch for OSF V3.1 is taking longer because this is the first port of
HUBwatch to a 64-bit environment.  HUBwatch for Windows V3.1 is easier 
because it is the 2nd port to the PC environment.  Plus, we have more demand
for the Windows version, so...
1403.2Where to find Windows seedsNAC::SEAVERBill Seaver, HUBwatch MktgFri Sep 16 1994 17:5537
    Note- HUBwatch for OSF will integrate with POLYCENTER NetView on
    release and seeds should be avialable by the end of September.  As for
    Windows seeds;
    
15 Sept 94- NAC::NIPG:[MANAGE.WINDOWS.WINDOW31]0README.TXT

SUBJECT: HUBwatch for Windows 3.1 seeds available

HUBwatch for Windows 3.1 seeds are now available at:
	NAC::NIPG:[MANAGE.WINDOWS.WINDOW31.DISK1]*.*
	NAC::NIPG:[MANAGE.WINDOWS.WINDOW31.DISK2]*.*

These files will be updated frequently until SSB submission around the end of
September.  We are ready for widespread testing on this kit and are especially 
looking for feedback in the following areas:
	- Do we have a reasonable set of non-DEC adapters and drivers 
		(see NAC::NIPG:[WINDOWS]DRIVERS.TXT for a list)
	- How it plays with HP OpenView (Windows)
		(see NAC::NIPG:[MANAGE.WINDOWS.HP] for kit pointer)
	- ODI (Novell driver)
	- Installation in general
This note is also being posted in the KALI::HUB_MGNT Notes conference; 
bug reports can be posted as replies to this note.

The manuals can be copied from
TNPUBS::PUBLIC$651:[PUBLIC.ONEHUB]HUBWATCH_WINDOWS_V31_USE.PS;1
and
TNPUBS::PUBLIC$651:[PUBLIC.ONEHUB]HUBWATCH-V31-INSTALL-CONFIG.PS;1

FDDI hub devices are now managed - DECbridge 900MX/DECswitch 900EF,EE, 
DECconcentrator 900MX, and PEswitch 900EF. This version also manages 
the DECrepeaters 900FP, 90FS and 90TS.  GIGAswitch will be managed from Windows
in the next version.  Currently it is only manageable from VAX/VMS and OSF1
AXP.  See NAC::NIPG:[MANAGE.CONFG]HUBWATCH.TXT for more details.

Bill NAC::SEAVER