[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1377.0. "Ugrade Concentrator with /HUBMOD?" by MINNY::SCHUMACHER (More than cows & chocolate...) Tue Sep 06 1994 03:31

    I just loaded the latest V1.1 consolidated Firmware kit on my
    VAXstation. I could upgrade the Hubmanager to V3.1.0 and other modules
    as well, except the DECCONCENTRATOR 900MX. When I try to download the
    firmware using
    
    DOWNLOAD LOAD/FORCE=HUBMOD/MODULE=8/PASS="blabla" 193.135.56.9 -
     MOM$LOAD:DEF6X280.BIN
    
    I get the following error message:
    
    Error , device info not found in SDDF.STP file
    
    What did I miss ?
    
    Many thanks for your help
T.RTitleUserPersonal
Name		DateLines
1377.1Can't abbreviate FORCE parametersROGER::GAUDETBecause the Earth is 2/3 waterTue Sep 06 1994 15:045
You must supply a complete parameter name to the /FORCE qualifier.  The error
message is quite clear; device "HUBMOD" is not in the SDDF.STP file.  But
"HUBMODULE" is.  So use "/FORCE=HUBMODULE" and everything should be fine.

...Roger...
1377.2SLINK::HOODI'd rather be at the PenobscotTue Sep 06 1994 19:5117
.0:
>    I get the following error message:
>    
>    Error , device info not found in SDDF.STP file


.1:
>You must supply a complete parameter name to the /FORCE qualifier.  The error
>message is quite clear; device "HUBMOD" is not in the SDDF.STP file.  But
>"HUBMODULE" is.  So use "/FORCE=HUBMODULE" and everything should be fine.



Clear as cement.  In the future (HUBwatch V4), this will all be much easier.

Tom Hood
HUBwatch