| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1373.1 | REFER TO NOTE 836 | DELNI::ROUNDS | | Tue Sep 06 1994 19:03 | 3 |
| Dan,
See Note 836.
|
| 1373.2 | COnfiguring it sux! | PTOJJD::DANZAK | Pittsburgher � | Tue Sep 13 1994 13:16 | 10 |
| One problem that I've run into is that when you point the configuration
to the NDIS driver - it does not put in all the requisite preliminary
NDIS information. You need to take PART of the Ethernetworks 3 driver
and manually merge it with the NDIS driver from your vendor.
It's UGLY....and it took me about 4-5 hours to figure out one day at a
customer site...
AARUGH,
j
|
| 1373.3 | Please tell us how ! | UNITED::64336::Phil_Pugh | So that's how it's done ! | Wed Sep 28 1994 11:08 | 9 |
| Could the author of .-1 (or amyone who has got it working) please post the
CONFIG.SYS, AUTOEXEC.BAT and PROTOCOL.INI for a working XIRCOM PCMCIA and
DECNDUP please ?
I have tried the suggestions in 836.* and cannot get DECNDUP to work.
I have no problems with PATHWORKS 5, HUBWATCH 3.1 and IRIS
Many THanks
|
| 1373.4 | Help? | CAPO::JACOMB_SC | I know enough to be dangerous!! | Wed Sep 28 1994 17:07 | 4 |
| I have also tried to configure the same way and can't get it to work.
Please help ASAP. I'm trying to update my 900MS hub to be able to run
Hubwatch V3.1 so that I can show a DECbridge 900MX at a trade show next
week.
|
| 1373.5 | ex | WELSWS::GREENR | Curiosity Killed The Cat | Thu Sep 29 1994 05:13 | 7 |
| Phil,
I have it working on my Laptop with the above config.
If your coming south at any time, you can copy it over.
regs
ross
|
| 1373.6 | Auto/Proto/Config Please | DPDMAI::WISEE | Pobodys Nerfect | Fri Nov 18 1994 12:17 | 4 |
| Could you please post it here so those of us that can not come
"SOUTH" can see how you did it?
Efw
|
| 1373.7 | Appologies for incorectly placed previous note. | WELSWS::GREENR | Curiosity Killed The Cat | Thu Dec 15 1994 16:38 | 4 |
| Appologies for not replying sooner - some how I missed your note.
I also have problems with NDUplus on Zircom - my config only works
reliably for HUBwatch/Probewatch and HP Openview.
ross.
|