[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1366.0. "DR900FP, Thinwire and flexi-channel?" by WARABI::CHIUANDREW () Wed Aug 31 1994 22:40

    Hi,
    
    Customer will put up DR900FP but have following questions on setup:
    
    1) In HUBwatch user manual, DR900FP can support upto 6 flexi-channels
    and one of port groups must to assigned to Thinwire, and we assume
    ports 1-2 assigned to Flexi-chan #1 and Thinwire (i.e. Leg 7 to
    thinwire), in the DH900 we have a DS90TL and a remote LAN is connected
    to port 1 of DR900FP via the front panel. Does it mean user on DS90TL
    can access to systems on LAN connected to port 1 of front panel?
    
    The DR900FP will repeat LAN traffic from Thinwire to ALL flexichannes
    and vice versa?
    
    2) With HUBwatch, we can have different grouping of ports to
    flexi-channels, butt what is the function of the 'MAC' column, why do
    we need it?
    
    3) If we do not need Thinwire connection of DR900FP, then we do not
    have to connect leg 7 of DR900FP to thinwire or by default leg 7 is
    connected to Thinwire?
    
    
    thanks in advance for help!
    Andrew Chiu - NI Sydnwy

T.R	Title	User	Personal Name	Date	Lines
1366.1	See note 1131	NACAD::PAGLIARO	Rich Pagliaro, Hub Products Group	`Thu Sep 01 1994 10:06`	35
	1) In HUBwatch user manual, DR900FP can support upto 6 flexi-channels and one of port groups must to assigned to Thinwire, and we assume ports 1-2 assigned to Flexi-chan #1 and Thinwire (i.e. Leg 7 to thinwire), in the DH900 we have a DS90TL and a remote LAN is connected to port 1 of DR900FP via the front panel. Does it mean user on DS90TL can access to systems on LAN connected to port 1 of front panel? >> >> Yes. >> The DR900FP will repeat LAN traffic from Thinwire to ALL flexichannes and vice versa? >> >> No. See note 1131.11 and 1131.13 for more details. >> 2) With HUBwatch, we can have different grouping of ports to flexi-channels, butt what is the function of the 'MAC' column, why do we need it? >> >> See 1131.11 >> 3) If we do not need Thinwire connection of DR900FP, then we do not have to connect leg 7 of DR900FP to thinwire or by default leg 7 is connected to Thinwire? >> >> By default, the hub manager connects the DR900FP to the dedicated backplane >> thinwire segment when the DR900FP is first installed in a DEChub 900MS. You >> can disconnect the DR900FP from the backplane thinwire segment any time you >> wish using HUBwatch's LAN Interconnect view. Regards, Rich
1366.2	thanks!!	WARABI::CHIUANDREW		`Thu Sep 01 1994 22:36`	4
	re .1, thanks for infor! Andrew