[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1363.0. "HUBwatch V3.0 doesn't display Network Utilization on DECconcentrator 900MX" by UTRTSC::BEEKMAN (Ton Beekman - NL/MCS - 7838-2345) Wed Aug 31 1994 07:58

	Hello,

	I'm using HUBwatch V3.0 and a DECconcetrator 900MX	
	The FDDI MAC Summary Window has a field with Network Utilization,
	however this field is greyed out. (NA)

	Is there any change that this will be implemented.

	Thanks, 

	Ton.
T.RTitleUserPersonal
Name		DateLines
1363.1MAC-2/3 chipLEVERS::ARGOWed Aug 31 1994 12:415
    The reason this field is greyed out is that your concentrator
    has the MAC-2 chip, not the newer MAC-3 chip.  All concentrators
    built today have the MAC-3 chip.
    
    Dennis
1363.2KLUSTR::SOUTHY::GardnerSouthie MudsharkSun Sep 04 1994 16:326
	obvious question: is there a way to field upgrade to the new
	chipset?

	(I can live without it but it would be nice)

	_kelley
1363.3not an FRULEVERS::ARGOWed Sep 14 1994 10:3112
    The MAC chip is not a field replacable item.  It has been done here
    in the lab, but is something you do when you have no other choice.
    
    Since the MAC-3 is a drop-in replacement for the MAC-2 the hardware
    revision number was not bumped.  In hind sight this may have been
    a mistake.  The best way to determine if the concentrator has a
    MAC-3 chip is from the date code.  The the date code is the first
    three digits following the AS in the serial number.  If the date
    code is AS429 there is medium chance you have the MAC-3.  If the
    date code is AS432 or higher you have a MAC-3.
    
    Dennis