[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1349.0. "HUBwatch & DS 700" by DPDMAI::DAVIES (Mark, SCA Area Network Consultant) Thu Aug 25 1994 13:13

    My customer has many DECserver 700s.  He wants to upgrade them to
    DECserver 900s.  GREAT.
    
    His question is:  Can HUBwatch manage the DECserver 700?
    
    I believe that this is a 2 part questions:
    
    1. Will HUBwatch draw a picture of the DS700 and allow him to manage
       via point-&-click?
    
    2. If not, can it be managed bu HUbwatch via the SNMP manager
       capability?    (yes, right?)
    
    Thanks,
    
    Mark

T.R Title User Personal
Name Date Lines

1349.1 SLINK::HOOD I'd rather be at the Kennebec Thu Aug 25 1994 15:34 24

T.R	Title	User	Personal Name	Date	Lines
1349.1		SLINK::HOOD	I'd rather be at the Kennebec	`Thu Aug 25 1994 15:34`	24
	> 1. Will HUBwatch draw a picture of the DS700 and allow him to manage > via point-&-click? If you mean "DS700", no. The DECserver 700 is not supported by HUBwatch. If you mean "DS900", yes. HUBwatch does support the DECserver 900TM. (and 90TL and 90M and 90L and 90L+). > 2. If not, can it be managed bu HUbwatch via the SNMP manager > capability? (yes, right?) I don't know what you mean by "SNMP manager capability". Again, HUBwatch does not manage (in any way) DECserver 700's. There is point-n-click management for the hub-based terminal servers (DS900/DS90) HUBwatch support for the DS900TM is somewhat limited. You can manage per-port characteristics, do session control, get counters, etc, but there is absolutely no LAT support. This is because the terminal servers did not implement a LAT MIB for SNMP management. Tom Hood HUBwatch

>    1. Will HUBwatch draw a picture of the DS700 and allow him to manage
>       via point-&-click?

If you mean "DS700", no.  The DECserver 700 is not supported by HUBwatch.
If you mean "DS900", yes.  HUBwatch does support the DECserver 900TM. (and
   90TL and 90M and 90L and 90L+).



>  2. If not, can it be managed bu HUbwatch via the SNMP manager
>      capability?    (yes, right?)
 
I don't know what you mean by "SNMP manager capability".  Again, HUBwatch
does not manage (in any way) DECserver 700's.  There *is* point-n-click
management for the hub-based terminal servers (DS900/DS90)

HUBwatch support for the DS900TM is somewhat limited.  You can manage per-port
characteristics, do session control, get counters, etc, but there is absolutely
no LAT support.  This is because the terminal servers did not implement a LAT
MIB for SNMP management.  


Tom Hood
HUBwatch