[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1335.0. "Q>Which node transmit the data?" by TKOV51::HAYAKAWA (Kohei Hayakawa, Network Team/SE, HUB6F) Mon Aug 22 1994 23:57

	Using PacketProbe90 and PROBEwatch, Can I find out a top 
	talker at peak period? 
	SNMP trap can tell us that segment utilization is over threshold, 
	but we cannot find the reason. My customer want to know which
	node transmits many traffic at peak period. 

	Regards, 
	kohei

T.R Title User Personal
Name Date Lines

1335.1 Workarounds to find top talkers NAC::FORREST Fri Aug 26 1994 17:52 10

T.R	Title	User	Personal Name	Date	Lines
1335.1	Workarounds to find top talkers	NAC::FORREST		`Fri Aug 26 1994 17:52`	10
	Neither the probe, nor PROBEwatch stores the top talker at the peak busy time. However, you can set a threshold on utilization or packets or octets or broadcasts. Then when you get the Trap (alarm), you can use PROBEwatch to look at the Top Talkers, Broadcasters, etc. In the next release of PROBEwatch (October), you can run a script on receiving a Trap, which would then go get the Top Talkers for you.

	Neither the probe, nor PROBEwatch stores the top talker at 
	the peak busy time. However, you can set a threshold on 
	utilization or packets or octets or broadcasts. Then when you 
	get the Trap (alarm), you can use PROBEwatch to look at the Top 
	Talkers, Broadcasters, etc.

	In the next release of PROBEwatch (October), you can run a 
	script on receiving a Trap, which would then go get the Top 
	Talkers for you.