[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1289.0. "Telnet on DECbrouter 90 with UCX 3.1" by BACHUS::VANDENBERGHE () Tue Aug 09 1994 10:02

	Hi,

        I have the following problem trying to start a Telnet session
        through the Icone of the DECBrouter90 using UCX 3.1.
        As much as I remember I had no problem with UCX 2.0x.

        The following message is displayed in the telnet window:

        HUBwatch DECbrouter Console

        %SYSTEM-W-NODEVAVL, no device available
        %SMG-F-INVPAS_ID, invalid pasteboard-id

        Window will disappear in 10 seconds  [**___ _____]

        If I modify the HUBWATCH$TELNET_INPUT.COM
        adding at the beginning of the file:

        $ define sys$input sys$output

	There is no problem anymore (per default, sys$output points logically
        to my disk driver).

        Did I miss something ?

        Thanks in advance,
        Robert
T.RTitleUserPersonal
Name		DateLines