[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1272.0. "Unable to Connect to DECserver 900." by YUPPY::GAY (David Gay - (7)847 6543) Thu Aug 04 1994 06:33

    Hi,
    
    I'm currently in the middle of installing and configuring a number of
    DEChub 900s with DECserver 900, each with Flash Ram cards in them.
    
    In each hub I've taken the DECserver 900 off the Thinwire segment and
    placed one of its links on to an IRB.   I've then, successfully used
    HUBwatch to manage 5 out of the 6 hubs.   
    
    On the 6th hub however, HUBwatch responds with unable to "connect to
    the agent" when I double click on the DECserver 900 module.   I can
    PING the device's TCP/IP address and I have enabled SNMP. 
    
    Any ideas or suggestions ?
    
    Thanks and regards,
    
    David.
T.RTitleUserPersonal
Name		DateLines
1272.1More info neededNACAD::HAROKOPUSSat Aug 06 1994 12:2612
    1) What versions of MAM firmware and NAS are you running?
    
    2) Is the community name on the DECserver "PUBLIC"?
    
    3) Are SNMP sets enabled as well as GETs and GET NEXT on the server?
    
    4) How is the DEChub 900 configured? out of band?  in band? 
    If in band what are you using for an IP services module?
    
    Thanks,
    
    Bob
1272.2Problem SolvedYUPPY::GAYDavid Gay - (7)847 6543Sun Aug 07 1994 10:508
    Bob,
    
    Thanks for the reply.   I solved the problem - SNMP weren't enabled
    after all, rectifying this made the "problem" go away.
    
    Regards,
    
    David.