[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1259.0. "GIGAswitch Spanning Tree Params Change ?" by YUPPY::GAY (David Gay - (7)847 6543) Fri Jul 29 1994 09:52

    Hi,

    Can the Spanning Tree parameters:

    -	Max Age;
    -	Forward Delay;    and
    -	Hello Timer;

    be changed on the GIGAswitch by HUBwatch or is a tool such as
    POLYCENTER NetView required ?

    Thanks and regards,

    David.

    [cross-posted in GIGASWITCH]

T.R Title User Personal
Name Date Lines

1259.1 Not supported in HUBwatch NACAD::HAROKOPUS Fri Jul 29 1994 11:12 10

T.R	Title	User	Personal Name	Date	Lines
1259.1	Not supported in HUBwatch	NACAD::HAROKOPUS		`Fri Jul 29 1994 11:12`	10
	HUBwatch does not support changing these parameters for the Gigaswitch. For the DECbridge 900 there is a config screen that allows you to change these. However, due to time constraints this view was not implemented for the Gigawswitch. We will add this to the wish list for HUbwatch V4.0. Regards, Bob

    HUBwatch does not support changing these parameters for the
    Gigaswitch.   For the DECbridge 900 there is a config screen
    that allows you to change these.  However, due to time constraints
    this view was not implemented for the Gigawswitch.
    
    We will add this to the wish list for HUbwatch V4.0.
    
    Regards,
    
    Bob