[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1256.0. "problem with concentrator 900 MX backplane ports ??" by GIDDAY::KING (..and then there were two..) Thu Jul 28 1994 11:36

    Hi There
    I have a customer with a decconcentrator 900 MX ( firmware 1.1 )
    attempting to configure a ring using the dechub900 "backplane"
    He is using hubwatch for VMS 3.0.0
    when he selects the configuration option on the concentrator
    he has no building blocks appear ( fddi point <- lan interconnection )
    so he cannot set up ports 7 ( or 8 ).
    Is this a firmware problem ??
    he has a bridge900 mx which he can set o.k. 
    I have not seen hubwatch talking to a 900 hub so am working in the
    dark here !!
    I read note 651 - and assume customer is tryin to configure
    dual ring ...
                                         2
       1...6 ( a on 1)                   b 
       [conc]                           [bridge]
           b                            a
           8............................1
    
       (trunk b )                        (trunk a )
    
    but he gets no choices for concentrator ?
    
    Tom King CSC Sydney
T.RTitleUserPersonal
Name		DateLines
1256.1V2.0 solved itPADNOM::PEYRACHEJean-Yves Peyrache Country Support Group FranceThu Jul 28 1994 12:398
    
      Hello tom,
    
       yes ,it,s a firmware problem , upgrade to V2.0 using Decnduplus
       and you could put your fddi ports  anywhere..
    
    
     Jean-Yves