Conference netcad::hub_mgnt

1240.0. "ODI support within Hubwatch T2.01" by BRULE::KNIGHTT (Who really cares about apathy?) Wed Jul 20 1994 12:27

    I was asked to look at a customer problem with Hubwatch for Windows.
    The customer was using the T2.01 kit, and trying to get Hubwatch to
    work using the ODI interface example provided in that kit (they are a
    netware shop and prefer ODI to NDIS). They had problems getting this to
    work, and I was asked to look at it, being the local Pathworks expert.
    
    It appears the main problem was that the Hubwatch T2.01 kit did not
    include a sample NET.CFG file, required for ODI to properly configure
    (its the equivalent of PROTOCOL.INI for NDIS). I basically took a
    NET.CFG file generated by Pathworks V5 setup, put this in the Hubwatch
    area, and it worked fine with the supplied STRTODI.BAT script.
    
    I suggest including a sample NET.CFG file, with sections for Etherworks
    II and III support, in the Hubwatch kit, to make this easier for
    customers to configure.
    
    I have included the NET.CFG file I used below (for an Etherworks III
    card using the supplied TCP/IP stack with Hubwatch).
    
                                                   Tom Knight
    
    Sample NET.CFG which will work with Etherworks III
    
    LINK SUPPORT
    
            MAX BOARDS      4
            MAX STACKS      11
    
            MEMPOOL         2k
            BUFFERS         2       1500
    
    LINK DRIVER EWRK3
    
            FRAME           Ethernet_II
            Int             5
            Mem             d0000
            port            2c00
            PROTOCOL        IPX             8137    Ethernet_II
            PROTOCOL        DRP             6003    Ethernet_II
            PROTOCOL        NETBIOS         8040    Ethernet_II
            PROTOCOL        LAST            8041    Ethernet_II
            PROTOCOL        LAT             6004    Ethernet_II
            PROTOCOL        MOP             6002    Ethernet_II
            PROTOCOL        LOOPBACK        9000    Ethernet_II
            PROTOCOL        IP              0800    Ethernet_II
            PROTOCOL        ARP             0806    Ethernet_II