[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1236.0. "DENMA V2.1.3" by NPSS::BIGELOW () Tue Jul 19 1994 11:22

    
    The DENMA V2.1.3 firmware is now (7/18/94) being installed in all modules
    in ASO manufacturing.  However, approximately 35 DENMA units have been
    shipped with V2.0 but containing the V2.1.3 QC kits.  The changes between
    firmware version 2.0 and 2.1.3 are minimal.  The biggest issue is that
    the release notes call out a different version than the firmware  that 
    the customer received.  So, there may be some confusion, but the actual 
    functionality differences are minimal.   I will post the affected
    serial numbers as soon as I receive them from ASO manufacturing.

T.R Title User Personal
Name Date Lines

1236.1 Need V2.1.3 for DEFMI LEVERS::HAROKOPUS Tue Jul 19 1994 12:27 6

T.R	Title	User	Personal Name	Date	Lines
1236.1	Need V2.1.3 for DEFMI	LEVERS::HAROKOPUS		`Tue Jul 19 1994 12:27`	6
	One big difference is that you need V2.1.3 to properly autodiscover the DEFMI installed in a DH90 and report the correct agent information to HUBwatch. Without V2.1.3 you must manage the DEFMI stand-alone when it's in the DEChub 90.

    One big difference is that you need V2.1.3 to properly autodiscover
    the DEFMI installed in a DH90 and report the correct agent information 
    to HUBwatch.
    
    Without V2.1.3 you must manage the DEFMI stand-alone when it's 
    in the DEChub 90.