[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1231.0. "How to associate DECnet name with DECnet address on DECrepeater 90C" by CX3PST::NOTAMI::A_ANDERSON (CX03 2/H13 NSU/VAX MacGhille Aindrais) Fri Jul 15 1994 15:12

I have a customer running HUBWatch for DOS 2.0.  If he clicks on a repeater 
port he sees a DECnet address and the MAC address for a node that is on that 
port.  He also sees a column labeled DECnet node name.  How does he enter DECnet 
names to be associated with the DECnet addresses?


I looked through the manuals and could not locate any information on how to 
set this up.  But then all I have is UHub watch for VMS manuals.  Can someone
supply a pointer to the Hubwatch for DOS documentation.


Thanks for any assistance
Alan S. Anderson
Network Support CSC CS
T.RTitleUserPersonal
Name		DateLines
1231.1not till V3.1 on Windows?NAC::FORRESTMon Jul 25 1994 14:5414
	I think the DECnet name will first be supported in V3.1. 

	The V2.0 manual can be copied from 

TNPUBS::PUBLIC$651:[PUBLIC.ONEHUB]HUBWATCH_WINDOWS_INSTALL_V2.PS

and

TNPUBS::PUBLIC$651:[PUBLIC.ONEHUB]HUBWATCH_WINDOWSV2_USE.PS


These were output in Postscript using Microsoft Word, so you need a
printer that supports the Word fonts to print them.