| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi,
A customer is trying to get a 3com 3C589 card to run Hubwatch for Windows
V2.0. The 3c589 is the PCMCIA version of the 3c509 etherlink III card.
He gets the following error when he loads the scheduler:
SCH0011 - no ndis interupt activity - may be NI_IRQ set
wrong or cable not attached or h/w / dll broken.
Only difference I can see is that he doesnt supply any io info in the
protocol.ini file as he claims this is not needed with any other software
that he runs.
He will try and add the io info - e.g. irq, ioaddress, ramaddress etc.
and test and let me know.
Has anyone got this to work with 3com cards and if so would like to
know the configuration.
Thanks,
Steve
CSC Sydney.
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1228.1 | PC-MCIA not supported (yet) | ROGER::GAUDET | Because the Earth is 2/3 water | Mon Jul 18 1994 13:25 | 5 |
The current version of DECndu Plus for DOS does not support the PC-MCIA cards. A new kit is in the works. No, I don't have a date/timeframe for its availability, nor is there a preliminary kit available. ...Roger... | |||||