Conference netcad::hub_mgnt

1217.0. "Repeater upgrade failed" by WELLIN::MCCALLUM () Wed Jul 13 1994 09:55

    
    I have a customer who is having difficulty in upgrading a DECrepeater
    900.
    
    Here is a dump of the output:
    
    $ @sys$startup:ndu$startup
    $ download load /force="hubmodule"/mod=6 147.184.208.129
    mom$load:detmm10g.bin
    
    (c) Digital Equipment Corporation. 1993. All Rights Reserved.
    
    DECNDU: (TFTP) Target address = 147.184.208.129
    [HUBMODULE] Getting Device chassis module info (ChasSlotModuleDescr)
       DECrepeater 900TM 32 Port TP Ethernet Rptr SNMP,
    HW=v1,RO=v1,SW=v1.0B
    
    [HUBMODULE] Setting (ChasLoadEntryStatus) to CreateRequest (2)
    [HUBMODULE] Set load host IP address (ChasLoadIpHostAddr)
       147.184.208.33
    [HUBMODULE] Setting load filename
       MOM$LOAD:DETMM10G.BIN
          [HUBMODULE] Setting (ChasLoadEntryStatus) Valid (1)
    [HUBMODULE] Setting (ChasLoadAdminStatus) Start-write (3)
    [HUBMODULE] STARTING TFTP SERVER
    DECNDU: (TFTP) Blocks sent = 903
    DECNDU: (TFTP) Transfer Complete.
    [HUBMODULE] TFTP DOWNLOAD COMPLETED
    [HUBMODULE] Polling for chasLoadOperStatus
    3 - FAILURE
    
    [HUBMODULE] Getting Device specific load status
       1
    [HUBMODULE] Getting Device chassis module info (ChasSlotModuleDescr)
       DECrepeater 900TM 32 Port TP Ethernet Rptr SNMP,
    HW=v1,RO=v1,SW=v1.0B
    
    $
    
    This seems to have failed - any ideas ?
    
    Thanks,
    
    Dave McCallum

    
    Dave,
    
    	Perform the upgrade by giving the DECrepeater 900TM its own IP
        address and then the command:
    
       $ download load /force="pcommon" w.x.y.z mom$load:detmm10g.bin
    
        where w.x.y.z is the 900TM's IP address.
    
        The DECrepeater 900TM does not currently support loading through
        the MAM, which the command in .0 is trying to do.
    
    Hope this helps,
    Bob