[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1214.0. "IP-services on what modules?" by UTOPIE::PAYERHUBER () Wed Jul 13 1994 04:32

    Gentlemen,
    What modules at what F/W rev. levels do support the IP-services, e.g.
    what modules can we use as inline management agents?
    Reason for this question is, that we were able to connect to a Dechub
    900 via SNMP only when we inserted a DR900TM, no go with DR900FP or
    DB900MX. Hubwatch is 3.0 and we upgraded the hub to 3.0.
    Cheers, fritz
T.RTitleUserPersonal
Name		DateLines
1214.1Following modules should support ip-servicesBIS5::RUTTENSWed Jul 13 1994 05:2316
    I don't have clue of F/W rev. levels in relation to ip-services.
    But to my knowledge following modules support ip-services.
    
    	DR900TM
    	DR900GM
    	DR900FP
    	DR90FS
    	DR90TS
    	DB900MX
    	DC900MX
    
    All future modules will also support IP services EXCEPT DECserver 900
    terminal servers and the older DEChub 90 modules. The 1st Token Ring
    module to support IP Services will be the DECMAU 900TH.
    
    Rgds.......Peter
1214.2Things to look forBIKINI::KRAUSECSC Network Management/HubsThu Aug 11 1994 05:2914
>    What modules at what F/W rev. levels do support the IP-services, e.g.
>    what modules can we use as inline management agents?
>    Reason for this question is, that we were able to connect to a Dechub
>    900 via SNMP only when we inserted a DR900TM, no go with DR900FP or
>    DB900MX. Hubwatch is 3.0 and we upgraded the hub to 3.0.

.1 correctly lists the available IP servers. Remember that you not only
need an IP server in the hub, but you also need *connectivity* from your 
management station to the IP server. This is especially tricky with the 
DR900FP, whoes MAC has to be configured to a specific port group. Also 
remember that the DB900MX comes with all ports switched to front panel, 
so you may not have connectivity to it, depending on your configuration.

*Robert