[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

1213.0. "Help with setup DEChub900" by GIDDAY::CHONG (Andrew Chong - Sydney CSC ) Wed Jul 13 1994 04:25

Hello,

	I know very little about DEChub900 so what I am asking could be very 
trivial. In a DEChub900 there are 2 modules , DECbridge900MX in slot 1 and
DECrepeater900FP in slot 2. There is no communication between the 2 devices.
How can I set this up so that devices connected on the bridge can communicate
with devices on the repeater ?

	This is a customer problem. He has Hubwatch for Windows V2.0 which he
has problem installing. We are trying to sort that problem at the moment. But
Hubwatch for Windows V2.0 does not support these devices anyway (correct me if I
am wrong ). 

	From the management port of the DEChub900 I can't see away to configure
the ethernets on the backplane. 

	Advise is needed urgently !

	
andrew

T.R	Title	User	Personal Name	Date	Lines
1213.1	v3.0	PADNOM::PEYRACHE	Jean-Yves Peyrache Country Support Group France	`Wed Jul 13 1994 05:22`	8
	Andrew, V3.0 of Hubwatch is mandatory for manage this kind of device and V3.0 of Hubmanager too. you must have this pre-requis to install your configuration Jean-Yves