[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1198.0. "SNMP scripts for FDDI configurations" by TLSE10::SELLES (Pierre-Jean - Toulouse -France) Fri Jul 08 1994 06:40


	we would like for a customer to write scripts
with SNMP so that we can configure without operator intervention
an FDDI connection for a concentrator . 

	as the MIBS are rather complex ( of course Hubwatch is hidding this
very well ) , do you have examples of some scripts
on how to configure ports and attach to a given FDDI channel ?

	thanks for your inputs
T.RTitleUserPersonal
Name		DateLines
1198.1no way...NACAD::PARISEAULuc PariseauFri Jul 08 1994 10:2013
	The instances for the ports in the chasPortTable are "random".
	Everytime you power up, the MAM will create this table and it
	may create a chasPortTable that looks different then the last
	time it was powered up (even if the configuration did NOT
	change.)  This is also true for the chasPortSubtypeTable,
	chasLigoTable, chasSubtypeLigoTable...

	Because of this, there is NO WAY (my opinion) to create a
	"simple" script to configure LAN Hopping.  And FDDI is the
	most difficult to do anyway.

	Luc