[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1182.0. "DECbridge900MX don't show correct values on spaning tree attributes" by ANTIK::WESTERBERG (Stefan Westerberg DC SN&O Stockholm) Fri Jul 01 1994 11:49

	Hi, I have seen that the DB900MX don't show correct values on 
	spaning tree attributes in the dot1dbridge MIB.


Command done on a DECbridge620 that is root bridge:

MCC> show snmp defeba dot1dbridge dot1dstp all attr

SNMP defeba dot1dBridge dot1dStp
AT  1-JUL-1994 15:49:43 All Attributes

                    CounterCreationTime =  2-MAY-1994 23:15:27.40
        dot1dStpTimeSinceTopologyChange = 515725600
                     dot1dStpTopChanges = 19
          dot1dStpProtocolSpecification = ieee8021d
                       dot1dStpPriority = 2
                 dot1dStpDesignatedRoot = %X000208002B2D9908
                       dot1dStpRootCost = 0
                       dot1dStpRootPort = 0
                         dot1dStpMaxAge = 700
                      dot1dStpHelloTime = 100
                       dot1dStpHoldTime = 100
                   dot1dStpForwardDelay = 1300
                   dot1dStpBridgeMaxAge = 700
                dot1dStpBridgeHelloTime = 100
             dot1dStpBridgeForwardDelay = 1300

	
Command done on a DECbridge900MX:

MCC> show snmp snebrier07 dot1dbridge dot1dstp all attr

SNMP snebrier07 dot1dBridge dot1dStp
AT  1-JUL-1994 15:49:47 All Attributes

                    CounterCreationTime = 27-JUN-1994 08:25:04.42
        dot1dStpTimeSinceTopologyChange = 7838700
                     dot1dStpTopChanges = 3
          dot1dStpProtocolSpecification = ieee8021d
                       dot1dStpPriority = 4
                 dot1dStpDesignatedRoot = %X000208002B2D9908
                       dot1dStpRootCost = 4
                       dot1dStpRootPort = 1
                         dot1dStpMaxAge = 700
                      dot1dStpHelloTime = 100
                       dot1dStpHoldTime = 100
                   dot1dStpForwardDelay = 600                   <---- WRONG
                   dot1dStpBridgeMaxAge = 1500
                dot1dStpBridgeHelloTime = 100
             dot1dStpBridgeForwardDelay = 1500

I would like to set the DB900MX as the root bridge, but when it shows an
incorrect value on dot1dStpForwardDelay I don't whan to risk any thing.

Is this a known problem and if not when could I expect a fix ?

Regards Stefan
T.RTitleUserPersonal
Name		DateLines