[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1069.0. "No response from DECrepeater 900TM" by BACHUS::VANDENBERGHE () Fri Jun 03 1994 13:31

    Hi,
    
    This is a new one..
    I just have installed Hubwatch 3.0, (new functions such as alarming and
    environnment monitoring is great) but I have also a new problem.
    
    All the modules of my hub were upgraded (Only the DECserver 900TM, I
    can't find the NAS containg version 3.1, BL80-29 this is not on the
    last CD, only 1.3 version BL80-27)
    
    The problem is on a DECrepeater 900TM HW=v1, RO=v1, SW=v1.0G.
    
    This module is the IP server for the MAM (Version 3.0).
    The IP address is 16.183.32.230 
    A ping on that address is OK
    
    If I click on the module, after a 2 seconds I receive the message 'no
    response from the agent'
    If I click ON AN INDIVIDUAL port the access is OK.
    So it looks like a familiar new feature .. a bug.
    
    Can somebody have a look on that,
    Thanks in advance,
    Robert
T.RTitleUserPersonal
Name		DateLines
1069.1May Need A MAM Reset with Current SettingsNACAD2::DRAGONMon Jun 06 1994 10:2310
    
    Robert,
    
    	What may be your problem is that you have set your read/write
        SNMP community string without doing a MAM reset. If you have set 
        the community string and have not reset your MAM, you will get behavior 
        similiar to what you are seeing. 
    
    Hope this helps,
    Bob
1069.2Maybe it was thatBACHUS::VANDENBERGHEMon Jun 06 1994 13:585
	I have switched off my hub during the week-end and now it work, 
	so the reset seems to work.

	Thanks,
	Robert