Conference netcad::hub_mgnt

1016.0. "KIT: HUBwatch for OpenVMS VAX V3.0" by SLINK::HOOD (I'd rather be surfing) Fri May 20 1994 14:56

The "official" SSB version of HUBwatch for OpenVMS VAX V3.0 is now available.

KIT FILES:
	SLINK::HUBWATCH$PUBLIC:HUBWATCH030.A                  [  315 blocks]
	SLINK::HUBWATCH$PUBLIC:HUBWATCH030.B                  [16632 blocks]
	SLINK::HUBWATCH$PUBLIC:HUBWATCH030.C                  [10773 blocks]
	SLINK::HUBWATCH$PUBLIC:HUBWATCH030_RELEASE_NOTES.PS   [  262 blocks]

	SLINK is in the LKG facility.  It is a VAXstation 3100 with
	limited resources, so when possible, please copy the kit
	after-hours or during lunch.

	Please be sure to copy and print the release notes.

LICENSE:
	HUBwatch for OpenVMS VAX V3.0 requires the HUBWATCH license PAK,
	available through VTX PAK.

INSTALLATION:
	HUBwatch for OpenVMS VAX V3.0 uses the VMSINSTAL utility.  Please
	read the release notes for required system and process quotas and
	privileges.

DOCUMENTATION:
	The HUBwatch for OpenVMS VAX V3.0 documentation, which includes the
	installation guide and the use manual, are also available.  The
	following file lists all the manuals and has net pointers where
	you can get them:
		SLINK::HUBWATCH$PUBLIC:HUBWATCH030-DOCS.LIS

NEW FEATURES:
	This kit supports all the new DEChub modules and the GIGAswitch.
	Please refer to the HUBwatch release notes for a complete list of
	new functions and features in the version V3.0 kit.

IMPORTANT NOTE:

	+-- HUBWATCH V3.0 WILL NOT WORK IF YOU HAVE OLD FIRMWARE !!! ---+
	|                                                               |
	|  To run version V3.0 of HUBwatch, you MUST have up-to-date    |
	|  firmware in your DEChub, hub modules, and/or GIGAswitch.     |
	|  Please read the release notes to determine the minimum       |
	|  firmware revisions required for your devices.                |
	|                                                               |
	+---------------------------------------------------------------+


BUGS?
	Please read the release notes for known bugs and limitations in
	this kit.

	Please use the ONEHUB QAR system on NACQAR:: to report problems
	not already mentioned in the release notes.

	Please refer to the release notes and the HUBwatch hyperhelp for
	questions about using HUBwatch.

On behalf of the HUBwatch development team,
Tom Hood
226-6776

ps: Don't forget to read the release notes!