[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

980.0. "PROBEwatch bind problem" by HGODCS::RICHARDLAM () Thu May 12 1994 07:07

I found the following inconsistencies in the PROBEWATCH products:

**********************

1. I copied the tar.Z file from the network, uncompressed it. Then it ran
   without me using "setld -l". However the owners of all files were set to 
   "504".

   It's alright, however, after I used "chown root *" to change the ownership
   of those files.

**********************

2. When I start the software using "pwmanger &", the following message appears
   on the screen:


#
Copyright (c) 1992-1994 Frontier Software Development, Inc.
                 All rights reserved

bind: Address already in use
Couldn't open SNMP-TRAP PORT (162)

***********************

Richard

T.RTitleUserPersonal
Name
DateLines
980.1see note 797 alsoWARNUT::64021::Tim_BanksNetwork MercenaryFri May 13 1994 05:123
see also note 797, the Windows s/w has a similar trait.....

	Tim
980.2DECagent = DECpacketprobe ?HGODCS::RICHARDLAMMon May 16 1994 04:197
    
    Note 797 is concerned with DECagent. Do you mean I should just treat
    the packet probe as a DECagent 90 and follow the steps in 797 to
    upgrade its firmware.
    
    
    Richard
980.3sorry 979 - typo!WOTVAX::64021::Tim_BanksNetwork MercenaryWed May 18 1994 09:161