[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

966.0. "Load errors updating DB90 to 3.1" by CSOPC2::Conferencing-User () Fri May 06 1994 13:48

When trying to upgrade a DecBridge 90 to firmware 3.1 I am getting the 
following errors.

Circuit SVA-0 line open error
Invalid mode for requested function
node = 62.805 db90

I tried to do the update using the following procedure:

1. Repowered the DB90 holding in the reset button to reset to factory default

2. set node 62.805 name db90 hard addr 08-00-2b-26-bc-b5 serv circ sva-0 -
 _ load file flash.exe

3. load node db90

At this point I get the error messages.  I have tried different nodes as the 
loading host and recieved similar errors.

Any ideas on what I am doing wrong.

Thanks 

Mike McKenna

T.R	Title	User	Personal Name	Date	Lines
966.1	My problem	CSOPC2::Conferencing-User		`Fri May 06 1994 15:34`	4
	Forget the problem. MOP wasn't running. Kind of hard to load without it. Mike