[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

961.0. "DECbridge 900MX docs ?" by YUPPY::DUNOYER () Thu May 05 1994 11:47

    Hi
    
    I understand the DECbridge 900MX is available now. Is the documentation
    available over the network, and if so, where ?
    
    Thanks
    
    Una
T.RTitleUserPersonal
Name		DateLines
961.1DECbridge 900MX docTNPUBS::EWARTThu May 05 1994 12:507
Una,

You can find a draft of the DECbridge 900MX (and all other hub module docs) in
the following dir:
TNPUBS::PUBLIC$DISK:[PUBLIC.ONEHUB]

tom
961.2Where does it tell you how to set bridging up ?YUPPY::DUNOYERFri May 06 1994 05:069
    Tom
    
    The only 900MX doc I can see there is the Installation Guide, which
    I've got. But where is the information about how to set the bridging
    parameters e.g. port cost, Spanning Tree priority ?
    
    Thanks
    
    Una
961.3LEVERS::SWEETFri May 06 1994 10:487
    There is a good level of detail in the HUBwatch V3 online help for
    settting up the bridge. The other source is the information in the
    Bridges and Extended LAN reference guide which is generally applicable
    to any Digital bridge. The 900MX is very similar in function to the
    the DECbridge 500.
    
    Bruce