[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

958.0. "Update DECagent90 with DECNDU problems" by UTRTSC::GROOT_R (Ronald de Groot) Thu May 05 1994 06:19

I have some problems and quistions about NDUplus and NDU2.0. I try to upgrade 
a DECagent90 and had the following problems.
Note:The DECagent90 is already upgraded that's not the problem! 
 

1.When use DECNDUplus for DOS I get the following error when I use the
  following command;
  decndup /u/v/i/n 08-00-2b-01-23-45 c:\denma.sys

  DECnduPlus:Beginning MOP downline load
            :error during boot message
            :receive error

  The agent does not respond?, but the problem was that you must use spaces
  between /u/v/i/n.
  decndup /u /v /i /n 08-00-2b-01-23-45 c:\denma.sys is working fine!
  This is not a real problem but only nice to known.

2.DECNDUplus for VMS needs UCX to install? Is there a way to install this
  without UCX because to upgrade the DECagent90 you only use MOP? I know
  that NDU needs IP to upgrade orther hardware products but you can use
  NDU2.0 without UCX (but with a license).

3.DECNDU2.0 from the VAXBINMAR943 CD don't work with VMS6.0 ! I get the
  following when I try It. 
                          
$download load/conf/log/nomanagement 08-00-2b-01-23-45 mom$load:denma020.sys

(c) Digital Equipment Corporation. 1992. All Rights Reserved.
Do you wish to continue? (y/n) Y
SET CIRC ISA-0 STATE OFF%NDU-I-START_DLU, Beginning MOP downline load
%SYSTEM-F-ACCVIO, access violation, reason mask=01, virtual address=40060860,
PC
=80000010, PSL=03C00004

  Improperly handled condition, image exit forced.

        Signal arguments              Stack contents

        Signal arguments              Stack contents

        Number = 00000005                807A1C4D
        Name   = 0000000C                00000002
                 00000001                7FF03F48
                 40060860                7FF03F30
                 80000010                00000004
                 03C00004                7FF04BC0
                                         00000001
                                         7FF05200
                                         00000067
                                         05000001

        Register dump

        R0 = 03C00000  R1 = 40060860  R2 = 00000067  R3 = 000021FC
        R4 = 00002200  R5 = 000021C8  R6 = 000015E4  R7 = 0000123A
        R8 = 00000067  R9 = 0000BD00  R10= 7FFEBD00  R11= 7FFE2BDC
        AP = 7FF03EE4  FP = 7FF03EA4  SP = 7FF03F20  PC = 80000010
        PSL= 03C00004
T.RTitleUserPersonal
Name		DateLines