| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
hi ,
Hubwatch for Dos V2.0 (same problem in T2.1) Decp425i (425 sx-25) 6 mega of
memory ethernet board Etherworks3.
under hubwatch and on a display of Hub900 heavy loaded (like 8decrepeater900tm
fully configured), all windows deappears and you go back to dos
restarting windows and afterthat Hubwatch a error message appears in error
window ::
"No buffer space available the socket cannot be created"
"please restart ip networks Service"
a reboot of pc is needed to clear the problem...
any ideas/tuning/comments will be appreciated
Jean-Yves
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 946.1 | HUBwatch for Windows requires 8MB min! | LEVERS::P_MCCARTHY | Mon May 02 1994 15:38 | 36 | |
Hi Jean-Yves,
Tuning won't help... You need "at minimum" an additional 2MB of
memory. I setup the configuration which I know we had seen running
before and it worked fine... Then I saw the reference to your system.
Page 1-2 of the HUBwatch Installation and Configuration manual lists
the Hardware Requirements for HUBwatch for WINDOWS.
Hardware Requirements
The following hardware is required to install HUBwatch for Windows.
o A 386 processor running at a minimum of 33 megahertz, or a 486
processor running at a minimum of 25 megahertz.
o A minimum of 8 megabytes of randow-access memory (RAM). Additional
memory improves performance.
o A minimum of 5 megabytes of available disk space.
---
So as you can see you are running the bare minimum processor (425sx)
and 3/4 of the bare minimum of memory.
From a "Practical Standpoint", you can run HUBwatch on a 425sx with
4MB but even 8MB will be slow. If performance is important, and you
plan to have a configuration containing many MAX modules, you should
consider 16MB but 8 MB is the minimum recommended.
Hope this helps...
Pat McCarthy
| |||||
| 946.2 | Always pay for see.. | PADNOM::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Tue May 03 1994 13:03 | 9 |
Thanks for your reply,
i try to add/buy more memories..
any chance to see this error message documented somewhere in
documentation, i think a good idea for future questions/complains
of many customers
Jean-Yves
| |||||