[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

945.0. "Invalid pasteboard-id ?" by ITTO05::ALBERTIN () Fri Apr 29 1994 09:01



	I've configured a version V 2.0.1 of HUBwatch, on a VMS 6.0 
	and I can't use a TELNET session console window to a DECbrouter 90T2
	located in a DEChub 900, I get the following message on the window
	and after 10 seconds the window dissapear:

	%SYSTEM-W-NODEVAVL, no device available
	%SMG-F-INVPAS_ID, invalid pasteboard-id

	I did the same installation on a VMS 5.5-2 and there it works
	just fine.

	Does any body out there has an idea of what a pasteboard-id is
	or where the problem may lie? 


						Regards Enrico
T.RTitleUserPersonal
Name		DateLines
945.1More info, please.SLINK::HOODI'd rather be surfingFri Apr 29 1994 11:3519
> %SMG-F-INVPAS_ID, invalid pasteboard-id

I'll take a look through the SMG documentation, but I'm running OpenVMS V6.1
on SLINK and that works ok.

What kind of machine is this?  

Can you also do me a quick test, please.
	$ SET VERIFY
	$ @SYS$SYSTEM:HUBWATCH$TELNET_LAUNCH <ip-adrs>
where <ip-adrs> is the ip address of your brouter.  (you may need to give
your process DETACH privs to do this).  This is the command the HUBwatch
brouter TELNET button executes.  All it does is a CREATE/TERM/DETACH command.
Does this work on your system?

Thanks,

Tom Hood
HUBwatch
945.2CREATE/TERM/DETACH works but..ITTO05::ALBERTINMon May 02 1994 07:099
    
    	Tom,

    	the  CREATE/TERM/DETACH works, but when I run 
    	SYS$SYSTEM:HUBWATCH$TELNET_LAUNCH.COM  I get the same problem 
    	as when I run it from HUBwatch, with the same comment and after 10 secs 
    	the window is gone.
    
    	             				Enrico