[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

862.0. "Can non-forwarding bridge provide IP Service?" by HGRNCC::FARADAYCHONG (Faraday Chong@hgo 852-8053590) Mon Mar 28 1994 02:31

    Have a question on IP service.
    
    Supposed there are two DECbridge 900BX in a hub connecting to the same
    FDDI network on the FDDI side, and connecting to the same Ethernet
    segment on the Ethernet side. This will result in: one DECbridge 900MX
    in forward mode and the other in standby mode.
    
    Will in-band management still works if the "standby" DECbridge 900MX
    was setup to provide IP service?
    
    Faraday
T.RTitleUserPersonal
Name		DateLines
862.1QUIVER::SLAWRENCEMon Mar 28 1994 10:015
    Yes this should work.
    
    As far as I've been able to determine, we havn't tested it yet, but we
    will..