[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

845.0. "Read only community for DEChub900?" by LICAUS::LICAUSE (Al Licause (264-4780)) Mon Mar 21 1994 11:10

I am at a loss as to how to configure a read only community for a DEChub 900.

When I use the console, the only thing that is presented is a read/write
community and it is not obvious as to how to specify anything other than a
single community, let alone a read-only community.

Any help appreciated.

thanks,
Al
T.RTitleUserPersonal
Name		DateLines
845.1You could use publicLEVERS::DRAGONMon Mar 21 1994 12:4510
    
    Al,
    
    	If you set the read-write community to something other than public,
        then you can use public as the read-only community since it is set
        that way by default. Other than that you may be able to set it via
        the MIBs, but not through the Hub Installation Menu.
    
    Bob
845.2See pub-common.mibQUIVER::CURRIERMon Mar 21 1994 13:417
    The public common mib contains the object 
    pcomSnmpAuthReadOnlyCommunity
    This is a read-write object that identifies an SNMP community with
    addess rights of read-only.   See pub-common.mib for more info on the 
    SNMP Authentiction group.
845.3LICAUS::LICAUSEAl Licause (264-4780)Mon Mar 21 1994 15:121
Thanks....welcome to the world of SNMP MIBs....right!