[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

817.0. "Hubwatch V2.0 and hub 900 questions" by LISTIM::ULTRIX () Mon Mar 14 1994 03:25

    Hi
    
    	Since I'm not a hubwatch persson , could someone help me on this.
    
    	A customer with hubwatch V2.0 is complaining that he doesn't see
    the display of a dechub 900 and he can't see the power supply also.
    
    	Questions:
    
    	1-Should he see the display of the DEChub 900 V2.1.0 ?
          It's just configuration?
    
    	2-Should he see the power's supply ?
    
    
    	Thanks in advance for all the help
    
    Carlos
T.RTitleUserPersonal
Name		DateLines
817.1HUBwatch V2.0 handles DEChub 900.SLINK::HOODI'd rather be surfingMon Mar 14 1994 11:2011
Yes, he should be able to display a DEChub 900 with HUBwatch V2.0, and he 
should also see the power supplies.

Is there any communition between the workstation and the hub?  Is he using
the in-band hub agent address?  Is there a DECrepeater 900 providing IP
services for the hub agent?  Is the out-of-band address being used with
a DECserver 90M/90TL/900TM providing SLIP?  Can he ping the devices?  Are
the community strings set up to match what he's giving HUBwatch?

Tom Hood
HUBwatch
817.2LISTIM::ULTRIXTue Mar 15 1994 03:4518
    Hi
    
    	Probably I didn't explain right , sorry for that.
        He can see all the devices on the hubwarch.The questions are.
    
    	1-The dechub 900 has a display on it . Should he see that display on
    the hubwatch , the only thing he asks is for the display that is on 
    the dechub shows up on the hubwatch.
    
    	2-Regarding power suplly , yes he sees the power suply's , but he
    wants to see the power comsuption of the power supply's.What I meant is
    If only module connected i have this power , with two modules I have this 
    power and so on.
    
    Thanks for your help.
    
    Carlos
817.3Not in V2.0 some in V3.0QUIVER::HAROKOPUSTue Mar 15 1994 10:379
    1 - No version 2.0 does not show the LCD display.   Probably won't
    make it into V3.0 either.
    
    2 - There is no power status information support in V2.0 but
    V3.0 will have an  environmental summary that will show this information.
    
    Regards,
    
    Bob
817.4Why no display shownSLINK::HOODI'd rather be surfingTue Mar 15 1994 11:377
1. One of the things that's keeping the display shown in the hub from being
   shown in HUBwatch is performance.  Scrolling that info and the continuous
   SNMP polling would eat up a lot of cycles (both workstation and network).
   How much slower do you want HUBwatch?  [we're working on performance...]

Tom Hood
HUBwatch