[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

792.0. "TCP/IP included?" by CGOOA::CRICK () Thu Mar 03 1994 18:03

    Does Hubwatch for Windows include TCP/IP?  The SPD doesn't indicate
    that TCP/IP is a prerequisite and I am assuming that TCP/IP is required
    for SNMP communications to the HUB 90 and 900.
    
    Please advise.
T.RTitleUserPersonal
Name		DateLines
792.1YesDELBOY::HATTOSFri Mar 04 1994 04:448
    The T2.8 kit I have does supply an IP stack.
    
    There is a little discussion going back to note 787 in which I seem to
    have a problem getting the supplied stack working. 
    
    You are correct that you will need an IP stack to manage via SNMP.
    
    Stuart
792.2SNMP/UDP/IPQUIVER::CURRIERMon Mar 07 1994 11:225
    The transport for SNMP is UDP.  IP/UDP/SNMP    TCP is not required to 
    do SNMP.  IP/UDP is required.
    
    Sheila