Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
Does anyone have any guidelines on the forwarding delay imposed by a DECbridge 90 ? regs, ross
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
778.1 | QUIVER::SLAWRENCE | Tue Mar 01 1994 09:47 | 9 | ||
The bridge forwards each frame as soon as it is received (meaning that the CRC and framing is correct), so the delay (as compared to a repeater) is the transmit time for the packet (a function of packet length); it is full wire speed. Note: when comparing this performance to 'switching' bridges, which begin forwarding as soon as the Address is received you should point out that such devices forward runts and other bad packets. This has the effect of reducing the available bandwidth of the net. |